I’ve got a confession to make. Right now I’m riding dirty. Both my bikes are overdue for state inspection, and it finally pushed me to sit down and think honestly about Yamaha MT-09 reliability issues I’ve run into over the past couple years. Nothing major, nothing that’s left me stranded on the side of the road, but enough little things that I don’t feel quite as bulletproof on this bike as I expected to.
I’ll be honest, I’ve been dragging my feet on the inspections. Neither bike needs brakes or tires, I haven’t put a ton of miles on either one over the past year, so I figured there was no rush. But Martin Moto gets slammed this time of year, and waiting two weeks for what should be a quick process started to feel dumb. So I’m taking the MT-09 in this week, and that got me thinking about everything that’s actually gone wrong with this bike since I bought it.
My dad and I were talking bikes after he dropped off the project bike, and I made an offhand comment that I’m not fully comfortable on the reliability side of the MT-09. He pushed back a little, which is fair, but it got me wanting to actually lay out what’s happened so far.
Table of Contents
Taking the MT-09 In for Inspection and a Zip Tune
Along with the inspection, I’m having them do a zip tune while it’s there, which is basically a basic service and oil change. I’m also asking them to take a look at the clutch.
There’s a clicking I feel in the clutch lever sometimes when I shift. Not all the time, only occasionally. I don’t think the cable needs adjusting since I’m getting full engagement, the bike loses power like it should and I can work it back into the friction zone fine. So the clutch itself seems to be disengaging properly.
My guess is it’s actually me. I think I’ve gotten into a habit of shifting quickly on this bike, pulling the lever in, shifting, and then letting the clutch back out before the shift has completed. If I’m slow and deliberate about it, pull the clutch, shift, get my foot completely off the shifter, then let the clutch out, there’s no click at all. So it might just be user error from riding the Ninja 400 so much lately. Still, I’d rather have them look at it while it’s already in for the zip tune than ignore it and find out later it was something real.
The MT-09 Reliability Issues I’ve Actually Run Into
This is the part that’s been nagging at me. None of these are deal breakers on their own, but add them up and you start to wonder.
The Battery Went Bad Early
The battery failed on me, and this is only a 2022 model. We’re in 2026 now, so that battery didn’t even make it that many years. My dad’s response was basically that batteries don’t last forever, which is true, but it still felt premature for a bike this age. Maybe that’s more about the battery than the bike itself, but it’s the first thing that made me raise an eyebrow.
I came out one morning after winter, tried to start the bike, and it was cranking slow but wouldn’t fire. Put it on the trickle charger overnight, and the next day it was cranking fine but still wouldn’t start. I had the dealership pick it up thinking it was a fuel system problem, since I’d had fuel system issues before on this bike. The battery was tested and it failed – a replacement started the bike up without issue.
The Cam Chain Tensioner Rattle
There’s a rattle that I’m pretty sure is the cam chain tensioner. This one’s a known issue with MT-09s, they’re just noisy bikes in that department. Knowing it’s a known thing doesn’t make it bother me any less though. At 12,000 miles, I don’t feel like I should already be dealing with stuff like this.
I keep coming back to the same thought, that maybe older bikes were simple enough that parts just didn’t wear out this fast. Part of why I bought a brand new bike in the first place was so I wouldn’t have to deal with this kind of thing. Turns out a new bike comes with its own list of small things to worry about, just a different list than an older bike would have. Live and learn, I guess.
A No Start Issue Tied to Dirty Injectors
When I got rear-ended, I had the MT-09 towed over to Martin Moto to complete the repairs and get it back on the road. During the repair, they tried to start the bike and it just wouldn’t start. They wound up diagnosing the problem as being dirty fuel injectors. A quick cleaning and it was running again.
This happened before the battery went bad and is why my mind immediately went here when the bike wouldn’t start.
What’s Next for the Ninja 400
The Ninja 400 also needs its state inspection, but I’m not in a rush there. I’ll bring it in after I get the MT-09 back, since I don’t want to be without a bike. I’d rather drop the Ninja off knowing the MT-09 is sorted and there’s nothing waiting to fail on me in the meantime.
Does Your State Require Inspections
I’m curious how this works where you ride. Drop a comment and let me know if your state requires inspections, and if it does, whether you actually get them done on time. I know plenty of guys whose bikes haven’t seen an inspection sticker in years. It’s just not high on the priority list for a lot of riders.
Ride With Me
If you want more of this kind of stuff, subscribe to the WaltInPA YouTube channel
for more riding content. If this one hit home, share this post with a friend who rides, chances are they’ve got an inspection sticker that’s overdue too. And if you want to talk bikes with people who actually get it, come hang out in the WaltInPA Discord
where good people talk about riding.
Recent Posts
Goofy opened this episode of Kickstand Conversations by calling accidents the taboo subject of motorcycling, the thing nobody wants to talk about even though every rider knows it can happen. So the...
My YouTube Content Tracker Is a Work in Progress (And That's Fine)
My YouTube content tracker is officially a mess, and I'm weirdly okay with that. I spent a good chunk of the weekend tearing apart what I thought was a nearly finished spreadsheet and realizing it...
